Gateway Mode

In the gateway mode the CAN@net II/Generic is connected to a PC or to a controller platform via TCP/IP. The application program on the host communicates via a standard TCP/IP socket and uses a simple ASCII protocol. The CAN@net II/Generic therefore provides simple, flexible access to CAN systems via a LAN or via the Internet.

Bridge Mode

Using 2 CAN@net II/Generic, a CAN-Ethernet-CAN bridge can be implemented. This bridge enables the exchange of CAN messages between two CAN systems, where filter tables can be defined.

Configuration and firmware update

Configuration of the TCP/IP parameters can be performed using an easy to handle PC tool with automatic device detection. Configuration of the bridge functionality and the CAN communication is supported by an implemented webserver.

Technical data

• Ethernet interface: 10/100Mbit/s autodetect (10-Base T / 100-Base T), RJ45 plug
• IP address distribution: DHCP, via PC tool
• Microcontroller: Freescale MCF5234, 150 MHz
• On board memory: 8 Mbyte DRAM, 4 Mbyte Flash
• CAN controller: 1 x Philips SJA1000 and 1 x internal
• CAN bus interface: ISO/IS 11898-2, sub D9 connector according to DS102, galvanic decoupled (500V)
• Power supply: 9-32 V, 3 W
• Temperature range: -20 ºC ... +70 ºC
• Certification: CE, FCC
• Size: approx. 22,5 x 100 x 115 mm

Contents of delivery

• CAN@net II/Generic, manual, sample programs