Universal programmer - ALL-100 / ALL-100P
ALL-100 family supports device programming
for variety types of device covering EPROM, EEPROM, Serial PROM, FLASH, PLD/CPLD/FPGA,
MPU/MCU, etc. Most programmable devices in DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, or BGA
package types can be programmed on a DIP-48 Programming Module, either directly or through
an appropriate ADAPTER/CONVERTER.
ALL-100 family features high-tech pin drivers to provide excellent programming
capabilities at high speed, high reliability and high expansion flexibility. All pin
drivers of ALL-100 family are fully programmable to meet modern programming /testing needs
including the most recent low voltage devices. High speed USB port is provided to connect
to the majority of notebook or desktop PCs running Windows 98se/Me/2000/2003 Server.
ALL-100 can be either used as a powerful universal programmer or upgraded to be an
ALL-100G Gang Programmer to work with various types of dedicated Gang Programming Modules
by just adding the 4th pin driver card into ALL-100 base unit. The big brother ALL-100G4
is composed of 4 units of ALL-100G in a single box for helping production lines to achieve
maximum programming capacity with minimum setup. With its state-of-the-art design, ALL-100
family is able to satisfy your device programming needs from the very earliest engineering
phase to small production stage all the way through mass production.
Features & Benefits
Excellent Performance - Uses flexible pin drivers to get
accurate waveforms,high programming speed plus over current protection, reverse insertion
detection, self diagnostics etc. ensure ALL-100's excellent performance.
Wide Device Coverage - Wide range of programmable devices from 8 pins up to 300
pins covering EPROM, EEPROM, Serial PROM, FLASH, PLD/CPLD/FPGA, MPU/MCU, etc. in DIP,
SDIP, SOP, SSOP, TSOP, PLCC, QFP, or BGA etc. package types.
Easy to Use - Runs on Windows. After master read or file download from PC, user
only needs to select function from Menu and then hit YES key on programmer to start
program function. Operation is very easy.
High Reliability - Uses proven ALL-11 technology (which it replaces) for high
programming quality
New Device Support via Internet - Continuous support for new programmable devices
at no extra cost
Ideal for Engineering Environment - Wide device covering range, flexible future
expansion capability help engineers to achieve challenging time-to-market goal
Specifications
Device Support
Pin Count : from 8 pins up to over 300 pins
Device Type: covering EPROM, EEPROM, Serial PROM, FLASH, PLD/CPLD/FPGA, MPU/MCU, etc.
Device Contact
Default - DIP48 ZIF socket
Others - SOP, TSOP, PLCC, QFP, MLF, SDIP etc. through dedicated multi-socket Programming
Modules (for ALL-100P)
Control
Controller - 16 bits high-speed controller with big sized FPGA & CPLD
YES Key - Press for operation
Indicators - GOOD LED / BUSY LED
Interface Port
1x USB port
Data Transfer Rate
USB 1.0/1.1 : 12 Mb/S
USB 2.0 : 480 Mb/S
Functions
Load file, Read Master, Program, Verify, Auto, ID Check, Checksum, Blank Check, Erase,
Secure, Protect/Unprotect, Edit, Function Configuration, Self Test
Host Computer Requirements
Intel Pentium or compatible processor with 32MB of RAM
At least one USB port is available (V 1.0/1.1/ 2.0)
5 MB free hard disk space with Windows 98se/Me/2000/2003 Server operating system
CD-ROM Driver.
Power
AC voltage - 100 - 240 VAC.
Frequency - 50 - 60 Hz
Power consumption - 0.5 A Rating
Dimensions
L x W x H - 260mm x 150mm x 100mm.
Weight
4 KG.
Operating Temperature
0-40oC(32-105 oF)
Certification
CE mark
Documentation
ALL-100
Data Sheet 
(692KB) >>>
