KEIL ULINK USB-JTAG
Local Menu
IXXAT Platinum Partner
You are here: ".$breadcrumb->show_breadcrumb().""; ?>

ULINK Family of USB-JTAG Adapters

ULINK-ME USB-JTAG Adapter

 

 

 

ULINK2 USB JTAG Flash Programming Micro Controller Configuration and Debug

ULINK2 - Standard JTAG solution offering standard features in a robiust unit

 

ULINK-me Low Cost integrated USB to JTAG connection

ULINK-me - low-cost bundled solution for short-term use

 

 

 

The Keil ULINK family of USB-JTAG Adapters connect your PC's USB port to your target hardware (via JTAG, SWD, or OCDS) and allow you to debug embedded programs running on target hardware.

  • ULINKpro Is a new debug unit that allows real-time data and instruction trace streaming via USB. ULINKpro supports: ARM7, ARM9, and Cortex-M devices Data and Instruction Trace for Cortex-M systems Sophisticated application analysis including execution profiling and code coverage High-Speed Flash Download. ULINKpro is capable of Flash Programming and debug the same as ULINK2
  • ULINK2 Replaces the original ULINK adapter. Supports various ARM7, ARM9, Cortex-M, 8051, and C166 devices. 10MHz JTAG clock, RTCK support, Serial Wire Debug (SWD) support, Serial Wire Viewer (Trace) support,  and a real-time agent.
  • ULINK-ME Offers a subset of the ULINK2 features: Supports ARM7, ARM9, Cortex-M, and NXP LPC900 devices Delivered and supported only as part of Keil or OEM Starter Kits Standard 20-pin (0.1") JTAG and 10-pin (0.05") Cortex Debug connectors