The iPC-I XC16/PCIe is a powerful and economic solution for an active CAN board with two CAN channels. The interface is state-of-the-art, supports PCI express and can be easily installed by Plug & Play. Some of the features offered by the on-board microcontroller include filtering, pre-processing, transmission and time-stamped storage of the CAN messages.
Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data, even in systems with a high bus load. In combination with the CAN driver (VCI, part of delivery), the iPC-I XC16/PCIe allows for the seamless integration of PC- supported CAN applications. In addition, the iPC-I XC16/PCIe is well-suited for use with the IXXAT analysis and configuration tools and for use as a CANopen network controller.
| PC bus interface |
PCIe (r1.0a), x1 link (2,5 Gbps per direction) |
| Memory range |
Plug & Play, 16 kB memory and 128 bytes I/O area |
| Interrupts |
INT A, Plug & Play |
| Microcontroller |
Infineon XC161, 40 MHz |
| Memory extension |
512 kByte SRAM, 128 kByte FLASH, 8 kByte DPRAM |
| CAN controller |
Internal TwinCAN module (two CAN channels) |
| CAN bus interface |
ISO/IS 11898-2, Sub D9 connector according to DS 102, galvanic decoupling |
| Power supply |
12 V DC, 60 mA typ.; 3.3 V DC, 200 mA typ. |
| Size |
Approx. 90 x 150 mm |
|
