The iPC-I XC16/PCI represents a very powerful and economic solution for an active CAN board with two CAN channels, covering a wide range of industrial and automotive CAN applications. The interface is state-of-the-art, supports PCI and can be easily installed by Plug & Play. Some of the features offered by the on-board microcontroller include filtering, preprocessing, transmission and time stamped storage of the CAN messages .
Due to the powerful microcontroller both CAN controllers can operate simultaneously without losing any data, even in systems with a high bus load. In combination with the CAN driver (VCI, part of delivery) the iPC-I XC16/PCI allows an easy integration of PC supported CAN applications. In addition the iPC-I XC16/PCI is well suited for use with the IXXAT analysis and configuration tools, as well as for use as a CANopen network controller.
Note: the iPC-I C165/PCI interface card has been discontinued - this is the replacement interface card.
| PC bus interface |
PCI bus (specification 2.1), 32 bit/33MHz, 5 V or 3.3 V |
| Memory range |
Plug & Play, 16 kB memory and 128 bytes I/O area |
| Interrupts |
INT A, Plug & Play |
| Microcontroller |
Infineon XC161, 40MHz |
| Memory extension |
512 kByte SRAM, 128 kByte FLASH, 8 kByte DPRAM |
| CAN controller |
Internal TwinCAN module (two CAN channels) |
| CAN bus interface |
ISO/IS 11898-2, Sub D9 connector according to DS 102, optional galvanic decoupling and high-/low-speed bus interface switchable via software |
| Power supply |
5 V DC, 300 mA typ.; 3.3 V DC, 120 mA typ. |
| Size |
Approx. 89 x 124 mm |
|
