The USB-to-CAN II is an active interface with two CAN-bus channels and one LIN channel (automotive version) for connection to the USB bus. With its powerful 16-bit microcontroller system, the interface allows filtering, pre-processing and saving of received messages. Transmission and reception processes can be controlled loss-free even with a high transmission rate and bus load. Together with the universal CAN driver VCI also supplied with the delivery, the USB-to-CAN II module enables simple integration of PC-supported applications in CAN systems. In conjunction with the canAnalyser from IXXAT, USB-to-CAN II is a convenient, mobile analysis and development tool. The interface can also be used as a master assembly, e.g. for. CANopen systems with many subscribers.
| PC bus interface |
USB, version 1.1, 12 Mbit/s |
| Memory range |
Plug & Play |
| Interrupts |
Plug & Play |
| Microcontroller |
Infineon 161u, 36 MHz |
| On board memory |
512 kByte RAM, up to 512 kByte FLASH |
| CAN controller |
two Philips SJA 1000 |
| CAN bus interface |
2 x RJ45 connector with RJ45 on Sub-D9 adapter line (10 cm), galvanically decoupled as an option
Industrial version: 2 x ISO/IS 11898-2
Automotive version: 1 x ISO/IS 11898-2, 1 x ISO/IS 11898-2/11898-3 switchable via software, 1 x LIN master/slave switchable via software (VCI V3) |
| Power supply |
5 V, 400 mA via USB |
| Size |
80 x 45 x 20 mm |
|
