The CAN-bus Repeater is used for the galvanic isolation of two
segments of a CAN-bus network, and for creating star or tree topologies. One
special feature of the Repeater is that it can separate a defective
segment from the rest of the network, so that the remaining network can
continue working. After elimination of the defect, the segment is switched
into the network again.
As an option, the Repeater can be equipped
with a low-speed bus interface according to ISO/IS 11898-3. This allows
operation of the Repeater as a high/low-speed converter. Its galvanic
isolation isolates both CAN segments against each other as well as against
the power supply.
| Display |
Transmit (2 green LEDs), defective segment
(2 red LEDs) |
| CAN bus
interface |
ISO/IS 11898-2, Terminals (CAN-High,
CAN-Low, CAN-GND) Both CAN lines are isolated from the power supply
DC/DC converter and against each other by a galvanic isolation. CAN
termination resistors are integrated (can be disabled). |
| Baudrate |
Up to 888 kbps |
| Delay |
150 ns (translates into ~30 m (~90ft.) bus
length) |
| Power
supply |
9-35 V DC, 3 W typ., through
terminals |
| Temperature
range |
-20 ºC ... +70 ºC |
| Housing,
Size |
Plastic enclosure, 110 x 75 x 22
mm |
Order number
1.01.0064.44000 |
CAN-Repeater (2 x ISO 11898-2) with galvanic isolation |
1.01.0064.46000 |
CAN-Repeater (ISO 11898-2 to ISO 11898-3) with galvanic isolation |
|
