Bridge Mode
he bridge mode allows the user to
set-up a CAN-Bluetooth-CAN bridge by using two CANblue/Generic devices.
Message exchange occurs on layer 2 and is transparent. The CANblue/Generic
can also be used in systems that work with CANopen, DeviceNet or
customer-specific protocols. Filters for CAN identifiers can be stored in
the devices for data exchange via Bluetooth. By using more than two
CANblue/Generic devices the coupling of the devices can be made
dynamically. The maximum distance between the CANblue/Generic devices is
100m, depending on environmental conditions.
ASCII
Protocol Mode
In ASCII protocol mode, functions for
transmitting and receiving CAN messages and for configuring the
CANblue/Generic are available to the user based on simple ASCII
commands. The CANblue/Generic is ideal for "non-Windows" systems or
embedded platforms that will be connected wirelessly to CAN.
| Bluetooth interface |
Bluetooth specification v1.1 +20dBm (100m
range) |
| Microcontroller |
Infineon 161 |
| Memory extension |
256k Flash, 128k RAM |
| CAN controller |
One Philips SJA 1000 |
| CAN bus interface |
ISO/IS 11898-2 (high-speed) and
ISO/IS
11898-3 (low-speed), switchable,
Sub D9 plug according to DS 102,
electrically isolated |
| Current supply |
9-30V DC |
| Temperature range |
0 ºC ... +55 ºC |
| Certification |
CE, FCC |
| Housing, Size |
Sturdy metal housing, approx. 85 x 72 x 35
mm (W/H/D) |
Order number
| 1.01.0125.00001 |
CANblue/Generic |
|
