Due to support of the TCP/IP protocol, the CAN@net II enables worldwide direct connection to a PC, implementation in an LAN or communication with the gateway via the Internet. The main area of application of the CAN@net II is remote access to CAN systems for service and remote maintenance.
With the VCI CAN driver included as standard in the delivery, the CAN@net II can be operated in the same way as all IXXAT CAN PC interface boards. All VCI-based CAN-programs and tools can therefore be run with the CAN@net II. The VCI CAN driver also offers the possibility of communicating via a PC with up to 128 CAN@net II devices simultaneously.
In addition to the CAN@net II/VCI, IXXAT also offers the version CAN@net II/Generic interface, which is addressed via a standard TCP/IP socket interface. This makes it possible to connect CAN@net II to any processor and operating system platforms.
| PC bus interface |
10/100 Mbit/s Ethernet (10-Base T/100-base T), Autodetect, Connector RJ45, Auto crossover |
| IP address allocation |
DHCP, via PC Tool |
| Microcontroller |
Freescale MCF5234, 150 MHz |
| Memory extension |
8 Mbyte DRAM, 4 Mbyte Flash |
| CAN controller |
1 x SJA1000 and 1 x internal |
| CAN bus interface |
ISO/IS 11898-2, Sub D9 plug according to DS 102, electrically isolated |
| Serial interfaces |
1 x RS232 for modem, 1 x RS232 for configuration |
| Current supply |
9-32 V DC, 3 W |
| Housing |
Plastic housing for top hat rail assembly |
| Dimensions |
22.5 x 100 x 115 mm |
|
