Gateway mode
In the gateway mode the CAN@net
II/Generic is connected to a PC or to a controller platform via TCP/IP.
The application program on the host communicates via a standard TCP/IP
socket and uses a simple ASCII protocol. The CAN@net II/Generic therefore
provides simple, flexible access to CAN systems via a LAN or via the
Internet.
Bridge mode
Using 2 CAN@net
II/Generic, a CAN-Ethernet-CAN bridge can be implemented. This bridge
enables the exchange of CAN messages between two CAN systems, where filter
tables can be defined.
Configuration and firmware
update
The configuration of the TCP/IP parameters can be
performed using an easy to handle PC tool with automatic device
detection. The configuration of the bridge functionality and the CAN
communication is supported by an internal webserver.
| PC bus interface |
10/100 Mbit/s Ethernet (10-Base T/100-base T),
Autodetect, RJ45 connector |
| IP address
allocation |
DHCP, via PC tool |
| Microcontroller |
Freescale MCF5234, 150 MHz |
| Memory extension |
8 Mbyte DRAM, 4 Mbyte Flash |
| CAN controller |
1 x Philips SJA1000 and 1 x internal |
| CAN bus
interface |
ISO/IS 11898-2, Sub D9 galvanically decoupled
(500V) |
| Current
supply |
9-32 V DC, 3 W |
| Temperature
range |
-20 ºC ... +70 ºC |
| Certification |
CE, FCC |
| Housing, Size |
Plastic housing for top hat rail mounting,
approx. 22,5 x 100 x 115 mm |
Order number
| 1.01.0086.10201 |
CAN@net II/Generic; one CAN channel |
|
